比亚乔摩托车部落

 找回密码
 ★乔友注册☆

手机号码,快捷登录

查看: 3450|回复: 4
打印 上一主题 下一主题

[两冲讨论] 询问下新PX150齿轮油用什么具体型号

[复制链接]
跳转到指定楼层
楼主
发表于 2015-7-11 14:00:27 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式

想看更多乔友精彩活动,马上注册加入部落吧!

您需要 登录 才可以下载或查看,没有帐号?★乔友注册☆

x
:RT
# @8 f0 K3 e* U- H$ j# N) S! T* M6 F5 l

+ K) K% ]" D: x" }; L$ ^* v. M7 S' f. i, y

1 B! b; H& I$ |$ S3 T: ^- i" u5 V. u5 N5 g# D8 R
沙发
发表于 2015-7-11 16:36:28 | 只看该作者
我用的速马力85W-140
回复 支持 反对

使用道具 举报

地板
发表于 2015-7-14 16:58:40 | 只看该作者
我用的托酷 75W-140的,每次250ml
回复 支持 反对

使用道具 举报

4#
发表于 2015-7-14 23:16:58 | 只看该作者
前程 发表于 2015-7-11 16:36
: a( l4 H8 T. m我用的速马力85W-140

& v' O8 e8 f- q4 r* j  t! y请教LXV150,齿轮油用什么好,到底好久一换。好像每个人说的都不一样。而且说明书上也没有明说。。。。谢谢
回复 支持 反对

使用道具 举报

5#
发表于 2015-7-15 04:09:12 | 只看该作者
Vespa P range and LML Star 2T models require 250ml of SAE 30 engine oil or SAE 80W gear oil.
# A9 S/ }; U$ s, r  T8 A6 I# ]
7 A  d' J, O6 |/ Z( jWith the scooter on the centre stand on level ground, fill the gearbox with oil until it reaches the oil filler hole.
* \, X6 H" o6 J3 a" z( F! S4 }1 R; c8 n" A5 O
Its is important to check the gearbox oil level regularly and top up if necessary to keep the clutch friction plates and the clutch side main bearing lubricated correctly.
" x* S% A; j0 i& l3 s
1 H& S: \3 ^, ~" Y: o1 BPiaggio recommend a first gearbox oil change at 3000 miles (5000 km) and then every 6000 miles (10000 km), however we would recommend changing the oil every 3000 miles (5000 km) on a standard engine and 1500 miles (2500 km) on a tuned engine. It is not a break down in the gearbox oil that is the problem but the amount of fine metal particals from the gearbox that build up in the oil. We recommend using a magnetic oil drain plug to remove the metal particals from the oil.
7 t6 q' X. |* m: n2 X  N8 ^: Y
( x# P' o% C5 f" l) B) C$ w! \When the Vespa P range was launched in 1977 Piaggio's recommended gearbox oil was 2 stroke oil with a SAE 40 viscosity. This was later changed to SAE 30 engine oil. In 1995 Piaggio changed the clutch on the Vespa P range and recommended SAE 80W gear oil for use in the gearbox.
7 m; u* w# ^1 C$ c4 S& K9 x8 K0 T) w3 U+ D2 S, {7 a0 ]4 _
Engine and gear oils are made in a similar way using a mineral or synthetic base oil blended with additive packs to reach a minimum specification. For example API (American Petrolium Institue) specifications are widely used. Engine oils usually having 2 specifications, S for spark ignition engines (petrol) and C for compression ignition engines (diesel) followed by a letter. The higher the second letter, the later the specification. Similarly gear oils have a GL- rating although this is followed by a number and it is not the case that the higher the number the later the specification and an API GL-4 gear oil is required for the Vespa / LML gearbox.; F4 c3 t& I' C8 m0 T

! d! `' ~9 I7 z7 E# M  r. `The main difference between a engine and gear oil is that the engine oil has been designed to be pumped 官官方这样说:8 O; ?$ H) x& M2 |: o! _0 `: u
around the engine and the gear oil has been designed to be circulated around the gearbox by the gearbox components and has extra additives to withstand extreme pressure.  u$ ^5 a# W/ D3 D( f/ w5 x

9 X6 p) p  t6 z9 F- D2 D/ {; j% uThe SAE grade is the oils viscosity at a certain temperature and the W stands for Winter (not weight) meaning its viscosity at low temperatures. At 100°C the viscosity of SAE 30 engine oil is similar to SAE 80W gear oil.
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | ★乔友注册☆

本版积分规则

QQ|联系我们|小黑屋|手机版|Archiver|比亚乔部落(北京金色前程信息技术有限公司) ( 京ICP备15049660号-1  

GMT+8, 2025-5-5 23:57 , Processed in 0.147217 second(s), 25 queries .

Powered by Discuz! X3.1

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表